Avaya 1165E - Manual (Page 46)

Virtual Private Network
46
IP Deskphone requires a software upgrade in order to proceed.
Click
No to proceed to a software upgrade. Follow the next steps
to perform a software upgrade on your IP Deskphone.
The Prepare Phone for Configuration window appears as
shown in
Figure 12 on page 46 .
Figure 12: Prepare Phone for Configuration
c. Double-press the Services key on the IP Deskphone quickly.
Select the Network Configuration menu item.
Move the cursor to locate Provision: or (TFTP IP:) in the
Network Configuration menu, and then write down the existing
address of the provisioning server so you can refer to it after you
complete this procedure.
Note: If a password prompt dialog box appears, press Cancel. Wait
until your IP Deskphone display completes the “Starting DHCP…”
screen, then perform Step c again.
For information about entering and editing text in the Local menu, see
“Entering and editing text” on page 31 .