Electrolux EI23CS35KB - Manual (Page 23)

23
IMPORTANT
The two drop in insulating inserts need to remain
in place while the Perfect Temp Drawer is on.
Removing the inserts will cause the temperature
of the crispers below it to be affected.
The drop in insulating inserts can be hand
washed with mild soap. Do not wash in a
dishwasher.
Do not clean the display area of the Perfect Temp
Drawer with abrasive or caustic cleaners. Wipe
clean with a moist sponge.
CAUTION
The Perfect Temp Drawer and frame can be
removed for cleaning but the control unit,
attached to the back of the fridge, cannot be
removed. Do not immerse the Perfect Temp
Drawer frame in water. Clean with a damp
cloth or sponge but prevent any liquid from
getting into the connector.
NOTE
When turned off the Perfect Temp Drawer
functions as a non temperature controlled drawer.
The Perfect Temp Drawer is intended for
packaged food products only. Leafy vegetables
and unpackaged fruits are best kept in one of the
lower crisper drawers.
The thaw setting holds a temperature for thawing
frozen foods for a specific amount of time. At the
end of that time, it then switches to the snacks
setting to store the thawed food.
To remove the Perfect Temp Drawer frame and pan
for cleaning:
1 Using your thumb, press down on the plastic
tab.
2 While holding down the plastic tab, lift front
slightly and pull drawer up and out.
To remove the Perfect Temp Shelf Assembly:
1 Carefully unplug the connector located at the
top right corner from the control unit under
the shelf by pressing the catch release.
2 Pull the connector out.
3 Lift the front of the shelf assembly up off of
the front support pins.
Storage Features
NOTE
If there are no plastic tabs on your model, just lift
front of drawer and pull up and out.