Electrolux EI23CS35KB - Manual (Page 7)

7 Installation
Installing Shelves
Your refrigerator was shipped with the shelf hanger
and shelf locking clip installed in their shipping
position. Below are the instructions to install the
shelves in your desired locations.
1 Remove shelf from its locked position by
pulling the slide mechanism toward you.
2 Lift the hanger directly upwards and pull
toward you to remove it from the ladder.
3 Place top hooks of the hanger into the
desired slot, and lower straight down until
lower hooks rest on the ladder.
4 Relock shelf by pushing the slide mechanism
away from you.
6 Gently set the shelf onto the hanger once the
back is secured by the hanger.
5 While holding shelf at a 45-degree angle with
the gray handle facing you, push the shelf
into the back of the hanger.
CAUTION
Shelves must be removed prior to moving the
refrigerator.