Electrolux EW28BS85KS - Manual (Page 10)

10 Installation
Installing Shelves
Your refrigerator was shipped with the shelf hanger
and shelf locking clip installed in their shipping position.
Below are the instructions to install the shelves in your
desired locations.
1 Remove shelf from its locked position by pulling
the slide mechanism toward you.
2 Lift the hanger directly upwards and pull toward
you to remove it from the ladder.
3 Place top hooks of the hanger into the desired
slot, and lower straight down until lower hooks
rest on the ladder.
4 Relock shelf by pushing the slide mechanism
away from you.
6 Gently set the shelf onto the hanger once the
back is secured by the hanger.
5 While holding shelf at a 45-degree angle with the
gray handle facing you, push the shelf into the
back of the hanger.
CAUTION
Shelves must be removed prior to moving the
refrigerator.