Electrolux EW28BS85KS - Manual (Page 13)

13 Installing Door Handles
Door Handle
Mounting
Instructions
1 Remove handles from
protective packaging.
2 Position fresh food handle
end caps (A) over upper and
lower pre-installed shoulder
bolts (B) that are fastened
into door, ensuring the holes
for the set screws are facing
towards the opposite door.
3 While holding handle firmly
against door, fasten upper
and lower Allen set screws
(C) with supplied Allen
wrench.
4 Repeat steps 2 and 3 to
install opposite handle.
Ensure the holes for the set
screws are facing towards the
first door.
5 Position freezer handle end
caps over left and right pre-
installed shoulder bolts that
are fastened to the drawer,
ensuring the holes for the set
screws are facing down.
6 While holding handle firmly
against drawer, fasten left and
right Allen set screws (C) with
supplied Allen wrench.
End
Cap
End
Cap
End
Cap
End
Cap
Mounting Refrigerator Handles
End
Cap
End
Cap
Mounting Freezer Handle
NOTE
To ensure that handles are flush with doors/drawer, make sure that set screws are completely tightened.
CAUTION
Wear gloves and safety goggles. Use extreme CAUTION when installing these handles.