Electrolux EW28BS85KS - Manual (Page 19)

19 Controls
Setting cooling temperatures
1 Touch the control panel to illuminate plus (+)
and minus ( –) indicators on either side of the
temperatures displays.
2 Press the + or – indicator to adjust the
temperature to the desired setting.
The temperature display will begin to blink with
the first touch. The display will time out after a
minute and returns to the basic display.
IMPORTANT
Pressing the system on/off icon does not turn off
power to your refrigerator. You must unplug the power
cord from the wall outlet.
IMPORTANT
When the ice maker is turned off, the ice in the bucket
should be transferred to the freezer or discarded to
prevent it from melting.
temp display Touch to toggle the freezer and fridge temp
display on and off.
Touch and hold temp display to toggle display
from Fahrenheit to Celsius.
mute sounds Tones emitted by each key press can be turned
off based on user preference. The sounds are
muted when the indicator is lit. Warning signals
will stay active.
factory default Resets all refrigerator settings such as temp,
temp display, and ring tones to their factory
default settings.
on off Press and hold for three seconds to turn off the
cooling system to clean the refrigerator. It also
turns off the ice maker and all dispenser func-
tions. The temperature display will read OFF.
Door Ajar If the door has been left open for an extended
period of time, an alarm will sound and the door
ajar indicator will display on the right side of the
control panel. The alarm is turned off by closing
the door. The mute sounds key will blink to
prompt the reset of any pending alarms. Press
this key to reset any system alarms.
High Temp In the event of a high temperature condition,
the temperature display will blink and display
HI. After 20 minutes, the high temp alert will be
displayed and the alarm off icon will illuminate
until pressed, acknowledging the alarm, at which
time the highest temperature reached will be dis-
played and the refrigerator will resume normal
operation. All other modes are turned off until
the alarm is acknowledged.
Power Fail In the event of a power failure, the power fail
alert will be displayed and the temperature
display will blink until the mute sounds icon is
pressed, acknowledging the alarm. Other modes
may be turned off until the alarm is acknowl-
edged. The power fail alert is turned off and the
refrigerator will resume normal operation. The
high temp alarm may also be illuminated until
a safe operating range temperature has been
reached.
Alarms