Aastra Telecom SIP 57I - Manual (Page 164)

Network Settings
4-40 41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Configuring the IP Phones
.
Aastra Web UI
Step Action
1 Click on Advanced Settings->Network->VLAN.
To globally enable/disable VLAN and set priority for non-IP packets:
2 Enable VLAN by checking the VLAN Enable field check box. (Disable this field by unchecking the
check box).
3 With VLAN enabled, select the priority (0 to 7) for non-IP packets in the Priority, Non-IP Packet field.
To set VLAN ID and priority for the LAN Port (Port 0):
4 Enter a VLAN ID value from 1 to 4094 in the VLAN ID field. Default is 1.
5 Choose a VLAN Protocol (SIP Priority, RTP Priority, and/or RTCP Priority), and select a priority for
the associated Protocol. Valid values are 0 to 7, Defaults are as follows:
SIP Priority = 3
RTP Priority = 5
RTCP Priority = 5