Aastra Telecom SIP 57I - Manual (Page 650)

Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
A-148 41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Appendix A
Parameter –
prgkeyN value
Value
(in Web UI)
Aastra Web UI Operation->Programmable Keys
Configuration Files aastra.cfg, <mac>.cfg
Description This is the value you assign to the programmable key.
The “prgkeyN value” parameter can be set for the following softkey types
only:
• speeddial (you can enter a speeddial number for this field;
optionally, you can also enter a prefix for the
speeddial value to allow the phone to dial the prefix
after you press the speeddial programmable key;
you then enter the rest of the number from the
keypad on the phone.)
• line
• BLF
• sprecode
• dcp
• XML
• Park
• Pickup
Notes:
1. For speeddial - Value is the phone number, extension, or prefix
number to enter for the programmable key.
2. For line - Value is optional; for example L4.
3. For blf - Value is the extension you want to monitor.
4. For sprecode - Value is dependent on services offered by server.
5. For xml - Value is IP address of the XML application.
6. For Park, Pickup - For valid values, see Chapter 5, the section,
“Park/Pickup Call Server Configuration Values” on page 5-157 . For
Park/Pickup examples, see Chapter 5, the section “Model 53i
Examples” on page 5-156.
Format Integer
Default Value N/A
Range N/A
Example prgkey3 value: 411
prgkey4 value: 123456+ (example of a speeddial prefix)