Aastra Telecom SIP 57I - Manual (Page 179)

Global SIP Settings
41-001160-00, Release 2.1, Rev 04 4-55
Configuring Network and Session Initiation Protocol (SIP) Features
Configuring the IP Phones
3 In the "Screen Name 2" field, enter the text you want to display on the phone under the “Screen
Name” on the idle screen.
Notes:
1. If other status messages display on the phone, such as “Network Disconnected”, the Screen
Name 2 value does not display.
2. Symbol characters are allowed (such as “#”).
3. If the text is longer than the display width, than the display truncates the text to fit the display.
4 In the "Phone Number" field, enter the phone number of the IP phone.
5 In the "Caller ID" field, enter the phone number of the IP phone.
6 In the "Authentication Name" field, enter the name used in the username field of the Authorization
header of the SIP REGISTER request.
7 In the "Password" field, enter the password used to register the IP phone with the SIP proxy.
Note: The IP phones accept numeric passwords only.
8 In the "BLA Number" field, enter the Bridge Line Appearance (BLA) number to be shared across all
IP phones.
Aastra Web UI
Step Action
Services
Dir
Callers
Icom
L1 John Smith
Sat Jan 1 12:18am
Lab Phone Screen Name 2
Screen Name
John Burns
Lab Phone
Sat Jun 8 2:55pm
1
Screen Name 2
Screen Name
Figure 1
Figure 2
57i
53i