Softkeys, programmable keys, expansion module keys, Reference, Administrator options – Aastra Telecom SIP 57I User Manual
Page 115
Administrator Level Options
41-001160-00, Release 2.1, Rev 04
3-57
Administrator Options
Administrator Options
Softkeys, Programmable Keys, Expansion Module Keys
A user or administrator can assign specific functions to softkeys, programmable
keys, or expansion module keys. The available keys for configuration depend on
the IP phone model as shown in the following table.
*The 536M expansion module consists of 36 softkeys. You can have up to 3 expansion modules on an IP
phone totaling 108 softkeys. Valid for 53i, 55i, 57i, and 57i CT phones.
**The 560M expansion module consists of 60 softkeys. You can have up to 3 expansion modules on an IP
phone totaling 180 softkeys. Valid for 55i, 57i, and 57i CT phones.
The softkey, programmable key, or expansion module key can be set to use a
specific function. Available functions depend on the IP phone model.
Reference
For more information about key functions see Appendix A, the section,
Programmable Key/Feature Key/Expansion Module Key Parameters”
For information about configuring softkeys, programmable keys, and expansion
module keys, see Chapter 5, the section,
“Softkeys/Programmable Keys/Feature
IP Phone Model
Softkeys
Expansion Module
Keys
Programmable Keys
53i
-
36 to 108*
(Model 536M)
4
55i
6
36 to 108*
(Model 536M)
60 to 180**
(Model 560M)
6
57i
12
36 to 108*
(Model 536M)
60 to 180**
(Model 560M)
-
57i CT
12
36 to 108* on Base
Station
(Model 536M)
60 to 180** on Base
Station
(Model 560M)
-