Configuring nat address and port (optional), Configuring nat address and, Port (optional) – Aastra Telecom SIP 57I User Manual
Page 145: Configuring the ip phones
Network Settings
41-001160-00, Release 2.1, Rev 04
4-21
Configuring Network and Session Initiation Protocol (SIP) Features
Configuring the IP Phones
Configuring NAT Address and Port (optional)
You can also configure a specific NAT address and port on the IP phone using the
configuration files, IP Phone UI, or Aastra Web UI.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Address Translation (NAT) Settings”
on
IP Phone UI
Step Action
1
Press
on the phone to enter the Options List.
2
Select Administrator Menu.
3
Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4
Select Network Settings.
5
Select Static NAT.
6
Select NAT IP.
7
Enter a public IP address of your NAT device in dotted-decimal format.
8
Press Done to save the setting.
9
Select NAT SIP Port. Default is 51620.
10
Enter the public SIP signalling port number of your NAT device.
11
Press Done to save the setting.
12
Select NAT RTP Port.
13
Enter the RTP Port number of your NAT device. Default is 51720.
14
Press Done (4 times) to finish.
Note: The session prompts you to restart the IP phone to apply the configuration settings.
15
Select Restart.