Configuring type of service (tos)/dscp (optional), Configuring the ip phones – Aastra Telecom SIP 57I User Manual
Page 158
Network Settings
4-34
41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Configuring the IP Phones
The following table identifies the default DSCP of protocols.
Configuring Type of Service (ToS)/DSCP (optional)
Use the following procedures to configure ToS/DSCP on the IP phone.
Protocol
Name
Default DSCP
Values in the
ToS Field
rtp
32
rtcp
32
sip
24
Note:
ToS/DSCP is enabled by default. The SIP, RTP, and RTCP
parameters show defaults of 24, 32, and 32, respectively. Use the
following procedures to change these settings if required.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
on
IP Phone UI
Step Action
1
Press
on the phone to enter the Options List.
2
Select Administrator Menu.
3
Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4
Select Network Settings.
5
Select Type of Service DSCP.