Aastra Telecom SIP 57I - Manual (Page 203)

Configuration Server Protocol
41-001160-00, Release 2.1, Rev 04 4-79
Configuring Network and Session Initiation Protocol (SIP) Features
Configuring the IP Phones Configuration Server Protocol
You can download new versions of firmware and configuration files from the
configuration server to the IP phone using any of the following types of protocols:
TFTP, FTP, HTTP, and HTTPS. The TFTP setting is the default download
protocol. You can configure the type of protocol that the IP phone uses by setting
it in the configuration files, the IP phone UI, or the Aastra Web UI.
Configuring the Configuration Server Protocol
Use the following procedure to configure the configuration server protocol.
Note: For DHCP to automatically populate the IP address or domain
name for the TFTP, FTP, HTTP, or HTTPS server, your DHCP server
must support download protocol according to RFC2131 and RFC1541 for
Option 66. For more information, see this chapter, the section,
“DHCP”
on page 4-4 .
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Configuration
Server Settings” on page A-13.
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2 Select Administrator Menu.
3 Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4 Select Configuration Server.
5 Select Download Protocol.