Aastra Telecom SIP 57I - Manual (Page 412)

Operational Features
5-202 41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Operational IP Phone Features
For more information about creating XML configuration scripts and for XML
script examples, see
Appendix G, “Creating an XML Application” .
Configuring the Phone to use XML
You can configure the phone to request the XML objects you create by
configuring specific parameters via the configuration files or the Aastra Web UI.
Users can access XML applications via softkeys configured on the IP phones.
The phone performs an HTTP GET on the URI configured in the Aastra Web UI
or configuration files.
You configure the following parameters for object requests:
• xml application URI
• xml application title
The xml application URI is the application you are loading into the IP phone.
The xml application title is the name of the XML application that displays on the
Services menu in the IP Phone UI (as option #4).
XML Get Timeout
The IP phone has a parameter called, “xml get timeout” that allows you to
specify a timeout value, in seconds, that the phone waits for the far side to return a
response after accepting the HTTP GET connection. If the far side accepts the
GET connection but never returns a response, it blocks the phone until it is
rebooted. If you enter a value greater than 0 for this parameter, the phone times
out and will not be blocked.
For more information about configuring this parameter, see Appendix A, the
section,
“XML Settings” on page A-89 .