Aastra Telecom SIP 57I - Manual (Page 413)

Operational Features
41-001160-00, Release 2.1, Rev 04 5-203
Configuring Operational Features
Operational IP Phone Features XML Push Requests
In addition to initiating a request to an XML application from a softkey, an HTTP
server can push an XML object to the phone via HTTP Post. When the phone sees
a PUSH request containing an XML object, it tries to authenticate the request. It
does so by checking the IP address or host name of the requesting host against a
list of trusted hosts (or domain names) configured via the Aastra Web UI
(parameter called XML Push Server List) or the configuration files (parameter
called xml application post list). If the request is authenticated, the XML object
is handled by the IP phone accordingly, and displays the information to the screen.
Example Configuration of XML application
The following example shows the parameters you enter in the configuration files
to configure an XML application:
xml application URI: http://172.16.96.63/aastra/internet.php
xml application title: Aastra Telecom
xml application post list: 10.50.10.53, dhcp10-53.ana.aastra.com
Configuring for XML on the IP Phone
After creating an XML application, an administrator can configure the IP phone to
use the application using the configuration files or the Aastra Web UI.
Note: The HTTP Post must contain HTTP packets that have an "xml"
line in the message body. For more information about adding "xml" lines
in HTTP packets, see
Appendix G, “Creating an XML Application.”.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “XML Settings”
on page A-89.