Aastra Telecom SIP 57I - Manual (Page 44)

Configuration Methods
2-2 41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Configuration Interface Methods
Configuration Methods
Description
You can use the following to setup and configure the IP phone:
• IP phone UI
• Aastra Web UI
• Configuration files
The following paragraphs describe each method of configuring the IP Phone.
IP Phone UI
The IP Phone User Interface (UI) provides an easy way to access features and
functions for using and configuring the IP phone. An Administrator can configure
all features and functions on the phone. A User can configure a subset of these
features and functions. Users of the IP phones should see their Model-specific
User’s Guide for available features and functions to configure.
You use the phone’s hard keys and keypad to configure specific features on the IP
phone. By default, specific softkeys/programmable keys on each phone model can
also access the Directory List and Callers List, and initiate transfers and
conference calls.
Reference
Refer to Chapter 1 , the section “IP Phone Models” on page 1-2 for keys specific to
your phone model.
For more information about using the hard keys on each phone, see
Chapter 5 , the
section, “Locking IP Phone Keys” on page 5-28 .
For more information about the softkeys/programmable keys, see Chapter 5 , the
section, “Softkeys/Programmable Keys/Feature Keys/Expansion Module Keys”
on page 5-93.
Note: There are specific parameters you can configure using only the IP
Phone UI, only and Aastra Web UI, only the configuration files, or a
combination of any of these methods. For more information about
configuring the phone, see
Chapter 4 , Chapter 5 , and Chapter 6 .