Aastra Telecom SIP 57I - Manual (Page 508)

Operational, Basic, and Advanced Parameters
A-6 41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Appendix A
Network Settings
Parameter –
dhcp
DHCP
(in Web UI)
IP phone UI Options->Administrator Menu->
Network Settings
Aastra Web UI Advanced Settings->Network->
Basic Network Settings
Configuration Files aastra.cfg, <mac>.cfg
Description Enables or disables DHCP. Enabling DHCP populates the required
network information. The DHCP server serves the network information
that the IP phone requires. If the IP phone is unable to get any required
information, then you must enter it manually. DHCP populates the
following network information:
IP Address, Subnet Mask, Gateway, Broadcast Address, Domain Name
Servers (DNS), TFTP, HTTP HTTPS, and FTP servers, and Timer
Servers.
For DHCP to automatically populate the IP address or qualified domain
name for the TFTP server, your DHCP server must support Option 66.
Format Integer
Default Value 1 (enabled)
Range 0 (disabled)
1 (enabled)
Example dhcp: 1
Parameter –
ip
Ip Address
(in Web UI)
IP phone UI Options->Administrator Menu->
Network Settings
Aastra Web UI Advanced Settings->Network->
Basic Network Settings
Configuration Files aastra.cfg, <mac>.cfg
Description This parameter assigns a static IP address to the IP phone device.
Format IP address
Default Value 0.0.0.0
Range Not Applicable
Example ip: 192.168.0.25