Aastra Telecom SIP 57I - Manual (Page 511)

Operational, Basic, and Advanced Parameters
41-001160-00, Release 2.1, Rev 04 A-9
Configuration Parameters
Appendix A
Password Settings
Parameter –
ethernet port 1
PC Port
(in Web UI)
IP phone UI Options->Administrator Menu->
Network Settings
Aastra Web UI Advanced Settings->Network->
Basic Network Settings
Configuration Files aastra.cfg, <mac>.cfg
Description The send (TX) and receive (RX) method to use on Ethernet port 1 to
transmit and receive data over the LAN.
Format Integer
Default Value 0
Range 0 - auto-negotiate
1 - full-duplex, 10Mbps
2 - full-duplex, 100Mbps
3 - half-duplex, 10Mbps
4 - half-duplex, 100Mbps
Example ethernet port 1: 2
Parameter –
admin password Configuration Files aastra.cfg, <mac>.cfg
Description Allows you to set a new administrator password for the IP phone.
Note: The IP phones support numeric characters only in passwords. If you
enter a password with alpha characters, the phone uses the default
password instead.
Format Integer
Default Value 22222
Range 0 to 4294967295
Example admin password: 1234567890