Setting factory defaults on the phone, Setting factory defaults using the ip phone ui, Set phone to factory defaults/erase local – Aastra Telecom SIP 57I User Manual

Page 73: Configuration, Administrator options

Advertising
background image

Administrator Level Options

41-001160-00, Release 2.1, Rev 04

3-15

Administrator Options

Administrator Options

Set Phone to Factory Defaults/Erase Local Configuration

You can set phones to their factory default setting or remove a local phone’s
configuration using the IP Phone UI or the Aastra Web UI.

Setting Factory Defaults on the Phone

Factory default settings are the settings that reside on the phone after it has left the
factory. The factory default settings on the phone sets the factory defaults for all
of the settings in the aastra.cfg, <mac>.cfg, and local configuration. Performing
this action results in losing all user-modified settings.You can reset a phone to
factory defaults using the IP Phone UI or the Aastra Web UI.

Setting Factory Defaults Using the IP Phone UI

IP Phone UI

Step Action

1

Press

on the phone to enter the Options List.

2

Select Administrator Menu and enter your Administrator Password (default is 22222).

3

Select Factory Default.

4

For 53i:
The “Restore Defaults?” prompt displays.
Press # to confirm.

For 55i/57i/57i CT:
The “Reset phone to factory defaults?” prompt displays.
Press Default to confirm.

Advertising
This manual is related to the following products: