Aastra Telecom SIP 57I - Manual (Page 733)

Sample BLF Softkey Settings
41-001160-00, Release 2.1, Rev 04 E-3
Sample BLF Softkey Settings
Appendix E BroadSoft BroadWorks BLF
The following are sample softkey and programmable key configurations to enable
Broadsoft BroadWorks Busy Lamp Field support on Aastra IP phones.
57i and 57i CT Configuration Parameters for Broadsoft BroadWorks BLF
softkey1 type: list
softkey1 label:
softkey1 value:
softkey1 line: 1
softkey2 type: list
softkey2 label:
softkey2 value:
softkey2 line: 1
list uri: sip:[email protected]
53i Configuration Parameters for Broadsoft BroadWorks BLF
prgkey6 type: list
prgkey6 label:
prgkey6 value: 1
prgkey7 type: list
prgkey7 label:
prgkey7 value: 1
list uri: sip:[email protected]
Note: One softkey must be defined of type “list” for EACH monitored
user. So if there are 2 users being monitored, 2 softkeys must be defined
of type list.
Note: One prgkey must be defined of type “list” for each monitored user.
So if there are 2 users being monitored, 2 prgkeys must be defined of type
list.