Aastra Telecom SIP 57I - Manual (Page 750)

How to Create an XML Application
G-12 41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Appendix G
Text Screen Object (Text Screens)
You use the AastraIPPhoneTextScreen object to display text to the LCD screen
on the IP Phone. The screen text wraps appropriately and can scroll to display a
message longer then four lines.
After implementing this object, text displays to the LCD on the IP phone.
A user can scroll through the screens as required. If you use the
“destroyOnExit” attribute in the XML script, when the user exits the
XML screeens, the screens are destroyed. You can also allow specific text
screens to redisplay for redirection to a new page by using the
“doneAction” attribute and specifying the new page to go to in the XML
script.
Implementation
The following is how you would implement the Text Screen object.
Softkey:
• 6=Done
XML Description:
<AastraIPPhoneTextScreen destroyOnExit = "yes/no">
<Title>Screen Title</Title>
<Text>The screen text goes here</Text>
</AastraIPPhoneTextScreen>
or
<AastraIPPhoneTextScreen doneAction=”HTTP address”>
<Title>Screen Title</Title>
<Text> The screen text goes here</Text>
</AastraIPPhoneTextScreen>
Notes:
1. You can use the “destroyOnExit” attribute with any XML object as
required.
2. You can use the “doneAction” attribute with the
AastraIPPhoneTextScreen and AastraIPPhoneFormattedTextScreen
objects only.
3. For all available parameters you can use for the Text Screen object, and
for an explanation of each parameter, see Aastra Telecom’s
"XML Developer’s Guide".