Incoming/outgoing intercom calls, Administrator options – Aastra Telecom SIP 57I User Manual
Page 80
Administrator Level Options
3-22
41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Administrator Options
Incoming/Outgoing Intercom Calls
The Incoming/Outgoing Intercom Call settings on the IP Phone
specify
whether the IP phone or the server is responsible for notifying the recipient that an
Intercom call is being placed. These settings also specify the prefix code for
server-side Intercom calls, and specifies the configuration to use when making the
Intercom call
.
UPnP Mapping Lines
Note: This option can
be set by both Users
and Administrators.
upnp mapping lines
Enables or disables the use of Universal Plug and
Play (UpnP) on a specific line on the IP phone.
For more information on this feature, see
Mapping Lines (for remote phones)”
.
Message Waiting
Indicator Line
Note: This option can
be set by both Users
and Administrators.
mwi led line
Allows you to enable the Message Waiting Indicator
(MWI) on a single line or on all lines on the phone. For
example, if you set this parameter to 3, the LED
illuminates if a voice mail is pending on line 3. If you
set this parameter to 0, the LED illuminates if a voice
mail is pending on any line on the phone (lines 1
through 9).
For more information on this feature, see
.
Parameter in
Aastra Web UI
Parameter in
Configuration Files
Description
Incoming Intercom Settings (all models)
Auto-Answer
Note: This option can
be set by both Users
and Administrators.
sip allow auto answer
Enables or disables the IP phone to allow automatic
answering for an Intercom call. If auto-answer is
enabled on the IP phone, the phone plays a tone to
alert the user before answering the intercom call. If
auto-answer is disabled, the phone rejects the
incoming intercom call and sends a busy signal to the
caller.
For more information on this feature, see
Outgoing Intercom with Auto-Answer and Barge In”
.
Parameter in
Aastra Web UI
Parameter in
Configuration Files
Description