Tone controls, And g, The default (neutral) position for the b – Aviom A-16CS User Manual

Page 36: And t

Advertising
background image

26

Aviom A-16R and A-16CS User Guide

selected Channel (or Group) is audible while the rest of

the mix is muted.

Mute Mode — When the

M

UTE

button is pressed, the

selected Channel (or Group) is muted

Save Mode — This mode is activated by pressing and

holding both the

R

ECALL

and G

ROUP

buttons. When

both buttons are held down, the Save Mode is active.

Pressing any numbered button while still holding this

button combination will save your current mix to that

Preset location.

MIDI Mode — MIDI is used for saving and reload-

ing your saved Presets. Only the A-16R is capable of

sending and receiving MIDI.

Note: A Preset is saved when the numbered

button is released.

Global Controls - the Master

Section

The three knobs in the Master section of the A-16R Personal Mixer

affect your monitor mix volume and tone directly. The Bass, Treble,

and Master Volume controls are always active, regardless of the

selected Preset. These controls are also found on the optional A-16CS

Control Surface.

Tone Controls

Use the Bass and Treble controls to change the overall balance of bass

or treble frequencies in your mix. These controls affect the entire mix,

not the individual Channels.

A-16R

A-Net Mixer

Phones

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

Mix In

Remote

Midi Off

Local

Midi On

The default (neutral) position for the

B

ASS

and T

REBLE

knobs is at 12

o’clock. To add more low frequencies to your monitor mix, turn the

B

ASS

knob to the right of the 12 o’clock position. To remove lows,

Advertising
This manual is related to the following products: