Aviom A-16CS - Manual (Page 53)

43
MIDI I/O
The A-16R can send its Presets to another device via system exclusive
(sometimes referred to as SysEx) commands. MIDI is used to save
banks of sixteen User Presets as a single file to a remote storage device
such as a computer running MIDI sequencer software. Once stored in
a remote device, the user’s mix Presets can be reloaded into any A-16R
that is connected via MIDI.
The MIDI Preset storage feature makes recalling setups for studios,
theatres, and touring professionals fast and easy.
�����������
���������������
There are three MIDI jacks found on the rear panel of the A-16R,
labelled In, Out, and Thru.
• MIDI Out is used to send Preset data from your A-16R
to another device capable of recording and storing the
sysex data.
• MIDI In is used to control the A-16R mix parameters,
or to send recorded SysEx messages from a storage
device back into the A-16R
• MIDI Thru can be used to daisy-chain MIDI devices.
The Thru jack carries a copy of the data appearing at
the A-16R MIDI In port.
A-Net In and Out
�����������
���������������