LG LTC22350SW - Manual (Page 20)

20
Sliding Shelves (in some models)
You can slide some of the shelves in your refrigerator
towards inside or outside like explained below.
• To slide the shelf towards the outside: Pull towards you,
figure A.
• To slide the shelf towards the inside: Push until it
stops, figure B.
Figure A Figure B
In order to remove a shelf from a metal frame
• Pull the shelf until it stops.
• Incline the front of the shelf towards the top and pull
forward.
• Lift the shelf in the manner it moves across the
support openings.
To put back into place just reverse these steps.
FROZEN MEAT COMPARTMENT/ CHEF FRESH
SNACK PAN (in some models)
To remove the Frozen Meat Compartment
• Pull the frozen meat compartment forward while
holding it with your other hand, slightly lift and pull.
• To replace the frozen meat compartment just follow
the steps in reverse.
CRISPER AND VEGETABLE DRAWER
• Slide crisper straight out to the stop.
• Lift the front of the crisper, then pull it out to remove.
• Remove the crisper by sliding it back in fully past the
drawer stop.
CRISPER HUMIDITY CONTROL (in some models)
You can adjust the humidity inside the drawers by
adjusting the control in a position between and .
For better preservation of the fruits allow air to leave
the vegetable drawer.
For a better conservation of vegetables allow the
maximum air in the drawer.
To remove the glass
• Remove Crisper Drawers.
• To remove glass above crispers, reach in under the
glass and lift up.
• Pull glass up and out.
To remove the crisper cover
• Remove both crispers.
• While holding the crisper cover support, pull the cover
up and out.
FIXED REFRIGERATOR RACK
The fixed refrigerator racks is removable for easy cleaning
and adjusting.
Removing the Fixed Refrigerator Rack
• Remove the content from the rack.
• Press the rack against the door’s inner wall (1) and then
pull it up (2).
USING YOUR REFRIGERATOR USING YOUR REFRIGERATOR