Connecting the water line – LG LTC22350SW User Manual
Page 27
27
• Remove the ring plug (1) from the valve located at the
top of such device.
• Place compression nut and the ferule at the end of the
pipeline. Insert pipeline into the connection valve as far
as possible. Hold tightly while holding pipeline.
Tubing 1/4” (6,35 mm)
Clamp Tubing
Compression
Nut 1/4”
6,35 mm
Ferrule Refrigerator
(sleeve) Connection
Hold on to the pipe from the handles or grabbers located
behind the refrigerator, loosing first the bolt holding the
handle. Afterwards, insert pipe into the hole and tighten
bolt to finalize.
10. OPEN THE BYPASS VALVE
Tighten all connections
containing leaks. Place access
cover back on compressor.
11. CONNECT TO REFRIGERATOR
Fix pipeline in a way that it does
not vibrate on the refrigerator or
wall. Push refrigerator against
wall.
12. TURN ICE MAKER ON
Turn ice maker switch into the
ON position. Ice maker
will start only after reaching its operating temperature
of 15 °F (-9 °C) or less. It will automatically begin the ice
production if switch is located in the
ON position.
CONNECTING THE WATER LINE
1