LG BX286 - Manual (Page 15)

English

English
Installation
Powering On the Projector
1. Ensure that the power cable and signal cable are securely
connected. The POWER LED will turn orange.
2. Remove the lens cap. 
3. Turn on the lamp by pressing “POWER” on the control
panel or the remote control.  The POWER LED will fl ash
green.
The startup screen will display in approximately 5 seconds.
When disappear startup screen, the POWER LED will turn
green.
4. Turn on your source (computer, notebook, video player,
etc.) The projector will detect your source automatically.
 If you connect multiple sources at the same time, use the
“SOURCE” on the remote control or use “RGB”, “S-video”,
“Video”, “HDMI” on the remote control to switch inputs.
Powering On/Off the Projector
 Turn on the projec-
tor fi rst and then the
signal sources.
Note
POWER
2
or
KEY
STONE
AU
TO
E M U L O
V
SO
U
R
C
E
MENU STILL
Lens Cap
1