LG BX286 - Manual (Page 47)

English

English
Appendices
Message
POWER-LED LAMP-LED TEMP-LED
(Green) (Orange) (Red) (Red)
Standby (Input power cable)
Normal (Power on)
Powering up (Warming up) Flashing
Power off (Cooling-I: It can’t ac-
cept any key at this status)
Flashing
Power off (Cooling-II: It can
accept power key to turn on the
projector)
Flashing
Error (Lamp failed)
Error (Fan lock) Flashing
Error (Over temp.)
Problem: Lamp burns out or makes a popping sound
 When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will not
turn on until the lamp module has been replaced. To replace the
lamp, follow the procedures in the “Replacing the Lamp”.
Problem: LED lighting message
Steady light =>
No light =>
Note