LG BX286 - Manual (Page 38)

38
English
User Controls
OPTIONS |
Advanced
Standby RGB Output
Choose “On” or “Off” the RGB output function at projector standby
status. Default is Off.
Wake On Lan
Choose “On” or “Off” the Network function at projector standby
status. Default is Off.
Direct Power On
Choose “On” to activate Direct Power mode. The projector will
automatically power on when AC power is supplied, without
pressing the “POWER” key on the projector control panel or
“POWER” key on the remote control.
Auto Power Off
Use this function to activate power settings. By default, the projector
is set to enter auto power off mode after 120 minutes of no activity.
A warning message appears on screen showing a 60-second
countdown before switching to auto power off mode. Press any
button during countdown period to stop auto power off mode.
Auto power off can be set to 30, 60, 90 or 120 minutes.
If an input signal is not detected within two hours during auto
power off mode, the projector switches from auto power off mode
to power off mode.
Quick Shutdown
Choose “On” to turn off the projector with a single press of the
power button. This function allows the projector to quick power off
with an accelerated fan speed.