LG BX286 - Manual (Page 20)

0
English
User Controls
The Projector has multilingual On-screen Display menus
that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect
the source.
How to operate
1. To open the OSD, press “MENU” on the Remote Control or Con-
trol Panel.
2. When OSD is displayed, use keys to select any item in the
main menu. While making a selection on a particular page, press
or “OK” key to enter sub menu.
3. Use keys to select the desired item in the sub menu and
adjust the settings using key.
4. If the setting has icon, you could press “OK” to enter another
sub menu. Press “MENU” to close the sub menu after adjustment.
5. After adjusting the settings, press “MENU” go back to the main
menu.
6. To exit, press “MENU” again. The OSD will be closed and the pro-
jector will automatically save the new settings.
On Screen Display
 If no button op-
eration is made for 30
seconds, the OSD will
be closed automatically.
Note
Main Menu
Sub Menu Setting