LG LP090HEM - Manual (Page 12)

12
Outdoor Grille
Wall Sleeve
Unit
Front Grille
(Shipped with the unit)
1 1
1
1
1
1 1
1
1
1
1
3 1
14 14
4
1 2
5
6
7 7
8
10
11
9
12
13
Hardware Installation
Hardware
Installation
Product Features
Before Installing the unit
This appliance should be installed in accordance with national wiring regulations. This guide acts as a guide to
help to explain product features.
CAUTION
Use the correct wall sleeve and outdoor grille
This unit is designed to be installed in the insulated wall
sleeve. When you replace the unit into the existing sleeve,
all wall sleeve used to mount the new unit must be in good
structural condition and have the outdoor grille that
securely attaches to the sleeves or the flange of the sleeve
to secure the new air conditioner.
With the LG sleeve, you can maintain the best
performance of the new air conditioner.
If you keep the existing sleeve, you run the risk of poor
performance or product failure. This is not covered
under the LG warranty.
Remove the vertical deflectors in the existing grille to
reduce condenser air recirculation that can cause the unit
to poor cooling or heating and component failure.
1. WALL SLEEVE
2. FRONT GRILLE
3. AIR FILTER
4. AIR INTAKE
5. AIR DISCHARGE 6. VERTICAL AIR DEFLECTOR
(HORIZONTAL LOUVER)
7. EVAPORATOR
8. CONTROL PANEL
9. POWER CORD
10. COMPRESSOR
11. BASE PAN
12. BRACE
13. CONDENSER
14. OUTDOOR GRILLE
(ARCHITECTURAL GRILLE)