Basic operation of the projector – LG HX350T User Manual
Page 12
12
Installation
1 . Place the projector on a sturdy and horizontal surface.
2 . Place the projector with the desired distance from the screen. The distance between the projector and the
screen determines the actual size of the image.
3 . Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a
right angle, the screen image will be crooked. Although, slight angles can be counteracted using the
Keystone adjustement. (Refer to page 22.)
4 . After placing the projector in its desired location, connect the video input(s). Then connect the power
cable to the projector and the wall outlet.
projection distance based on the picture format
Projection distance (D)
Projection offset ratio: 110%
38.6 mm
Projection distance (D)
Basic Operation of the Projector
Screen
Screen height (X)
X/2
X/2
Y/2
Y/2
Screen
Screen Width (Y)
4 : 3 Scale
Diagonal Size (mm)
Screen Width (Y) (mm)
Screen height (X) (mm)
Projection Distance (D)
(mm)