Connecting to a video source, Connecting to a dvd player, Connecting to a dtv settop box – LG HX350T User Manual

Page 16

Advertising
background image

16

Connections

Connecting to a DVD Player

< How to connect a Component source >

* Depending on the equipment, the component output jacks (Y, P

B

, P

R

) of the DVD

Player may be labeled as Y, Pb, Pr/Y, B-Y, R-Y/Y, Cb, Cr.

1 . After connecting the Component cable of DVD Player to the

RGB to Component cable, connect it to the

RGB IN terminal

of the projector.

* When connecting the component cable, match the jack colors

with the component cable.(Y=green, P

B

=blue, P

R

=red)

2 . Connect the

AUDIO IN of the projector to the output jacks of

the audio source with an audio cable.

< How to connect a HDMI source >

1 . Connect the

HDMI of the projector and the HDMI output port

of the DVD Player with an HDMI cable.

2 . Set the DVD Player's resolution to one of the following:

480p/720p/1080i/1080p mode.

<DVD Player>

Component cable

Connecting to a DTV Settop Box

< How to connect a HDMI source >

1 . Connect the

HDMI of the projector and the HDMI output

port of the DTV settop box with an HDMI cable.

2 . Set the DTV receiver's resolution to one of the following:

480p/720p/1080i/1080p mode.

* Please refer to the owner's manual of the DTV settop box for the connection between the projector and DTV set-

top box.

< How to connect a Component source >

1 . Connect the DTV settop box Component cable with

RGB to Component cable and than connect it to

RGB

IN of the projector.

* When connecting the component cable, match the jack

colors with the component cable.(Y=green, P

B

=blue, P

R

=red)

2 . Connect the

AUDIO IN of the projector to the output

jacks of the audio source with an audio cable.

<DTV Settop Box>

<DTV Settop Box>

RGB to Component

Cable

<DVD Player>

HDMI Cable

HDMI Cable

Audio Cable

Audio Cable

Component cable

RGB to Component

Cable

Connecting to a Video Source

< How to connect >

1 . Connect the

VIDEO IN of the projector to the output jack of

the video source with a video cable.

2 . Connect the

AUDIO IN of the projector to the output jack of

the audio source with an audio cable.

* You can connect a VCR, a camcorder or any other compatible video image source to the projector.

<VCR>

Audio Cable

Video Cable

Advertising