Turning on the projector, Turning off the projector, Focus and position of the screen image – LG HX350T User Manual
Page 14: Selecting input mode, Input
14
Installation
Selecting input mode
1 . Press the
INPUT button on the remote control.
2 . Selecting an input signal with the
INPUT button will only change the projector only to connected inputs. You
can change it to any inputs with the
＜, ＞ button.
• The component input is always active.
• You can also use this function through the
MENU button.
Input
TV
Video
Component
RGB-PC
HDMI
Turning on the Projector
1 . Make sure the power cord is connected correctly.
2 . After wait for a moment, press the
POWER button on the top cover or the POWER button on the remote
control. (The light on the control panel will be turned on.)
• Press the
INPUT button on the remote control to select the input signal you want.
• When you press the
POWER button on the remote control or the POWER button on the control panel when you
turn on the projector, the lights for
POWER and MENU buttons on the control panel will be turned on.
• Check if the lens door is open before turning on the power.
Turning off the Projector
Press the
POWER button on the top cover or the POWER button on the remote control.
When an image appears on the screen, check if it is in focus and fits the screen properly.
• To adjust the focus of the image, rotate the focus ring.
Focus ring
Focus and Position of the Screen Image