LG HX350T - Manual (Page 15)

15
Connections
Connections
Connecting to a Computer
Connecting to an Antenna or Cable
Connecting to a Speaker or Headphone
* You can connect the projector to a computer with VGA, SVGA, XGA, SXGA
output.
* Refer to page 51 for resolutions the projector supports.
* To prevent damage do not connect to the power outlet until all connections
are made between the devices.
< How to connect >
1 . Connect the RGB IN of the projector and the computer output
port with a computer cable.
2 . Connect the AUDIO IN of the projector and the computer audio
output port with an audio cable.
* You may have to change the resolution that your PC exports to one
supported by the projector. (Refer to page 51.) This projector may not
support output from laptops when the laptop screen is on.
< How to connect >
Connect a RF Coaxial wire to the Wall Antenna Socket or Outdoor
Antenna. For Optimum picture quality, adjust the antenna direction
if outdoor antenna is used.
* If the antenna needs to be split for two Projector’s, install a 2-Way
Signal Splitter.
* For much more information about antennas visit our Knowledgebase
at http://lgknowledgebase.com. Search for antenna.
Connect the Audio Out port of the projector to headphones or
powered speakers.
Audio Cable
Audio Cable
Computer Cable
Computer Cable
Antenna (Analog or Digital)
Wall Antenna
Socket
Outdoor Antenna
(VHF, UHF)
Multi-family
Dwellings/
Apartments
(Connect to wall
antenna socket)
Single-family
Dwellings /Houses
(Connect to wall jack
for outdoor antenna)
Be careful not to
bend the copper
wire when connect-
ing the antenna.
Copper Wire
RF Coaxial Wire
(75 Ω)
RF Coaxial Wire (75 Ω)
Cable TV
Wall Jack
Cable
or