Operating the projector, Channel menu options, Channel setup - auto scan – LG HX350T User Manual
Page 17: Channel selection, Add/delete channel
17
Operating the Projector
CHANNEL Menu Options
Operating the Projector
* The On-Screen Display (OSD) in this manual may be slightly different from your projector.
Channel Setup - Auto Scan
Add/Delete Channel
* When selecting DTV or CADTV input signal in the Manual Tuning menu, you can view the on-screen signal strength monitor
to see the quality of the signal being received.
* Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list.
Run this function if you change your residence or move the projector. Also, make sure to run this function with the antenna
connected during projector broadcasting hours.
Auto Tuning memorizes only the channels available at the time.
ꔂMove ꔉOK
CHANNEL
Auto Turning
Manual Turning
Channel Edit
ꔂMove ꔉOK
CHANNEL
Auto Turning
Manual Turning
Channel Edit
1 . Press the
MENU button. Then, move to CHANNEL with the
∧, ∨,
＜, ＞ buttons and press the ◉OK button.
2 . Press the
∧, ∨ buttons to move Auto Turning and press the ◉OK
button.
3 . Press the
∧, ∨ buttons to move Yes and press the ◉OK button.
• When setting the
Auto Tuning or Manual Tuning, the number of maxi-
mum channels you can store is 1000. It is subject to change depending
on the broadcasting signal environment.
• Memorizes all the available channels in the order of DTV, TV, CADTV and CATV.
• Press the
BACK button to exit the menu screen.
1 . Press the
MENU button. Then, move to CHANNEL with the
∧, ∨,
＜, ＞ buttons and press the ◉OK button.
2 . Press the
∧, ∨ buttons to move Manual Turning and press the
◉OK button.
3 . Press the
＜, ＞ buttons to move DTV, TV, CADTV, or CATV and
press the
∨ button.
4 . Press the
＜, ＞ buttons to move channel you want to add or delete.
5 . Press the
∨ buttons to move Add or Delete and press the ◉OK button.
• Press the
BACK button to exit the menu screen.
Check your antenna connection.
The previous channel information
will be updated during Auto Tuning.
Start
Close
Channel
Select channel type and
RF-channel number.
◀
DTV
▶
2
Close
Delete
DTV 2-1
Bad Normal Good
Press the
CH
∧, ∨ or Number 0 - 9 buttons to select a channel number.
Channel Selection