Audiovox Pocket PC - Manual (Page 24)

Chapter 2: Basic Skills
24
3. Reattach the Color Panel.
Note Returning the switch to the “Stop” (the upper side) resets the device back to its factory
settings - initial setup will need to be repeated. To move to the “Stop” side, slide the
switch while inserting the stylus into the Battery Switch Lock.
Charging LED
• Steady orange .............. Built-in battery charging
• Flashing yellow ............. Charging has stopped due to extreme temperatures. Charge at a
temperature of approximately 41
°
F - 95
°
F (5
°
C and 35
°
C).
• Steady green ................ Built-in battery fully charged.
• Steady yellow ............... Built-in battery charging but level is not strong enough to power.
Incoming Call / System Notification LED
• Fast flashing orange ..... Incoming call
(Approx. 2Hz)
• Slow flashing orange .... Indicates alarm as set through Calendar or Tasks.
(Approx. 1Hz)
Radio Standby Switch
Determines functionality of device. To turn ON, slide Radio Standby Switch to the upper side.
• ON ....... Can be used as phone to make and receive calls
• OFF ..... Cannot function as a phone
Using the Stylus
Use only on touch-screen for menu selection or data input.
• Tap: Touch the screen once with the stylus to open items and select options.
• Drag: Hold the stylus on the screen and drag it across to select text and images. Drag in a list
to select multiple items.
• Tap and hold: Tap and hold the stylus on an item to see a list of actions available for that
item. On the pop-up menu that appears, tap the action you want to perform.
Note Only use the supplied stylus on the touch screen. If the stylus tip becomes damage,
replace with a new one. Using a ballpoint pen or damaged stylus may damage the
screen.