Audiovox Pocket PC - Manual (Page 31)

Chapter 2: Basic Skills
31
Connecting to a Computer
Before connecting your device to a computer, check the following.
• ActiveSync ® is on your computer. (For installation procedures of ActiveSync ® , see Quick Start
Card.)
• The device is turned off.
• The computer you’re connecting has an available USB port for the cradle.
To connect using the supplied USB cradle:
1. Connect the USB cradle to your computer as shown in the illustration below.
2. Insert the device into the USB cradle.
Make sure that the connector on the cradle is inserted into the port on the bottom of the device.
Data can not be transferred if the connection is not made.
When your device is properly inserted into the cradle, your device will turn on automatically and
ActiveSync
® will automatically open on your computer.
Note Avoid using your device in environments that are likely to be affected by static electricity
or are prone to high electrical noise. If you connect your device to a computer via the
docking cradle for data transfer or data restoration purposes, Audiovox Communications
Corp. will not be responsible for any device or computer malfunction, problems with data
transfer or (strikethrough: restoration creation or data communication), or data
modification/loss that may occur in these environments.
USB port