Audiovox Pocket PC - Manual (Page 59)

59
Chapter 3: Phone Functions
Keypad Operation List
Regardless of the program in use, pressing the SEND button or the END button while Watcher is
open displays the VOICE tab of the Watcher screen.
Even if the power is turned off, pressing the SEND button turns the power on and displays the
VOICE tab screen. (However, the setting can be changed not to turn the power on.)
When the Watcher screen is displayed, the SEND/END buttons on the device perform the same
functions as the SEND/END buttons on the screen. Button functions include:
SEND
END
CLR
0-9,
* , #
Idle
Calls phone number displayed on
screen. If a phone number is not
displayed, last number dialed is
called.
Delete all entered numbers at
once.
Delete entered numbers one by
one or tap and hold CLR button
to delete them all at one time.
Enter the number you wish to
call. Tap and hold the Speed Dial
location number for one-touch
dialing of that number.
Incoming Call
Answer a call.
Reject the incoming
call.
Mute the ringer
tone.
If Any-key Answer is
set, you can answer
a call by tapping any
of these keys.
During a Voice Call
Answers incoming call; switches to
Three-Way calling.
End all calls including the three-way
calling.
Delete messages or entered numbers
one by one. Tap and hold the CLR
button to delete them all at one time.
Number entered is displayed on
screen.
Navigation Button and Program
When in the Watcher screen, pressing the navigation button on the device opens the following
programs:
Top : Phone Book
Bottom : Messaging
Right : Call Log
Left : Speed Dial
Speed Dial Call Log
Phone Book
Messaging