Audiovox Pocket PC - Manual (Page 30)

Chapter 2: Basic Skills
30
Method of Setting Card into SD Card Slot
Inserting a card:
1. Turn off the power.
2. Insert the card with its contact surface (metal contact surface) facing backward into the
device.
Note An SD dummy card is loaded in the SD card slot at purchase. Remove the SD dummy
card before inserting the card.
Removing a card:
1. Make sure that no application is accessing the SD card.
2. Turn off the power.
3. Lightly press down on the card until a clicking sound is heard. The card will pop out slightly
from the slot.
4. Pull the card straight up to remove.
Contact surface
Setup Options