Audiovox Pocket PC - Manual (Page 29)

Chapter 2: Basic Skills
29
Initial Setup
When using your device for the first time, completely charge the battery then follow the initial setup
procedures below:
1. Press the Power button and when the welcome screen appears, tap the screen with the stylus
to start the setup process.
2. When the align screen appears, follow the directions for adjusting the touch screen until the
stylus screen appears.
• If a finger or any other object touches the screen during a correction, it will be cancelled.
Repeat the correction procedure.
Note To display the align screen after the initial setup process, press the Record button while
pressing the center of the navigation button, or by tapping
, Settings, System, and
then Screen.
3. Read and understand how to use the stylus, then tap Next.
Note See “Using the Stylus” on page 24 for more information.
4. Read and understand pop-up menu operation, then tap Next.
• Read the on-screen explanation and then operate the screen.
Display the pop-up menus, and cut and paste the data according to the screen instructions.
When this stage is complete, tap Next.
5. Follow the directions for setting the location, then tap Next.
6. When the complete screen appears, initial setup is finished. After tapping the screen, the Today
screen will appear and the device will be ready to use. See “Today Screen,” later in this chapter
for more information.