Aastra Telecom 800 - Manual (Page 43)

Aastra 800 Monitor “Connections” Tab
41
2. Click the Stop button to manually end the Aastra 800 communications system.
This command is only available if the Aastra 800 communications system is cur-
rently running. Using this command ends the Aastra 800 main application as
well as the RTP service program in a coordinated way. Note that all communi-
cation services are interrupted by this command.
3. Click the Start button to manually start the Aastra 800 communications
system. This command is only available if the Aastra 800 communications
system is currently stopped.
4. Click the Aastra 800 Login button to start the Windows standard web browser
to display the web console of the Aastra 800 communications system.
4.5 “Connections” Tab
On the Connections tab, you can view the voice connection statistic in a graphical
display.
The display is refreshed continuously. The connection count axis will adapt auto-
matically. The count of connections is displayed as follows:
■ A blue line indicates the highest count of active voice connections encoun-
tered since the Aastra 800 communications system was started (numeric
display: Since systemstart).