Aastra Telecom 800 - Manual (Page 52)

Configuration Configuring the Aastra 800
50
6.1 Configuring the Aastra 800
6.1.1 Preparing the Configuration
Before starting with the configuration, make sure you have the following docu-
ments at hand:
■ A list of the terminals to be connected
■ A list of the IPEIs, if you wish to log on DECT terminals in the secure procedure
■ A list of the users to be set up (staff entitled to use the services of the
Aastra 800) with their names, departments, and the internal call numbers you
want to allocate to them
■ For Internet access: the Internet service provider access data.
Data not available for initial configuration can be updated or corrected at a later
date.
6.1.2 Starting the Web Console
1. Start your Web browser. Enter the Aastra 800 IP address in the “Address” box.
2. The Aastra 800 Web console is started. First set the country in which you are
operating the Aastra 800, and in which language the Web console is to be dis-
played.