Aastra Telecom 800 - Manual (Page 57)

Configuration Aastra 800 in Computer Networks
55
6.2.2 LAN Factory Settings
This IP address configuration is activated in the unit’s factory and default settings:
6.2.3 Codes for IP Configuration
In the event that the IP configuration of the Aastra 800 has to be changed, you can
also use a code digit procedure to change these basic settings. Entry can be made
from system telephones.
Set IP Address
H *182 Z (system PIN) *
Z (www) * Z (xxx) * Z (yyy) * Z (zzz) #
Set NET Mask
H *183 Z (system PIN) *
Z (www) * Z (xxx) * Z (yyy) * Z (zzz) #
Example
Enter:
H*182
0000*192*168*99*254#
If required, initiate a system restart with the following procedure:
Description Setting
DHCP server Active in “Static address assignment”
mode
DHCP addresses in the LAN 192.168.99.130 to 192.168.99.169
Net mask assigned via DHCP 255.255.255.0
Gateway assigned via DHCP PC’s IP address
DNS server assigned via DHCP PC’s IP address
Time-Server assigned via DHCP PC’s IP address
Domain name assigned via DHCP empty