AMX TPI-PRO-2 - Manual (Page 46)

Configuring Communication
40 TPI-PRO Total Presentation Interface - Pro Edition
Using your NetLinx Master to Control the Unit
Refer to your particular NetLinx Master’s instruction manual for detailed information on how to
download the latest firmware from www.amx.com.
Once the Master’s IP Address has been set through NetLinx Studio (version 2.4 or higher):
1. Launch your web browser.
2. Enter the IP address of the target Master (ex: http://198.198.99.99) into the web browser’s Address
field.
3. Press the Enter key on your keyboard to begin the communication process between the target
Master and your computer.
Initially, the Master Security option is disabled (from within the System Security page) and
no username and password is required for access or configuration.
Both HTTP and HTTPS Ports are enabled by default (via the Manage System > Server
page).
If the Master has been previously configured for secured communication, click OK to accept
the AMX SSL certificate (if SSL is enabled) and then enter a valid username and password
into the fields within the Login dialog.
4. Click OK to enter the information and proceed to the Master’s Manage WebControl Connections
window.
5. You can access the Manage WebControl Connections page (FIG. 28) by clicking on the Manage
connections link (within the Web Control section within the Navigation frame). Once activated, this
page displays links to G4 panels running the latest G4 Web Control feature (previously setup and
activated on the panel).
6. Click Yes from the Security Alert popup window to agree to the installation of the G4 WebControl
application on your computer. This application contains the necessary Active X and VNC client
applications necessary to properly view and control the unit’s pages from your computer.
FIG. 28 Manage WebControl Connections page (populated with compatible panels)
Compatible
G4 panels
Compression
options