AMX TPI-PRO-2 - Manual (Page 62)

Firmware Pages and Descriptions
56 TPI-PRO Total Presentation Interface - Pro Edition
Video Settings - RGB Adjustment Page
The RGB Adjustment page (FIG. 41) sets the RGB properties of the incoming signal. You can access
this page by pressing the incoming signal area on the Video Adjustment page as long as an RGB signal is
currently displaying.
FIG. 41 RGB Adjustment page
The elements of the RGB Adjustment page are described in the table below:
Video Settings Page Elements (Cont.)
Undo Changes The Undo Changes button disregards any changes made on the page since
the last settings were saved.
Save Settings The Save Settings button saves any changes made to this page.
RGB Adjustment Page Elements
Back Saves the changes and returns you to the previously active touch panel page.
Connection Status icon This visual display of the connection status allows the user to have a current
update of the TPI-PRO’s connection status regardless of what page is currently
active.
• A Lock only appears on the icon if the TPI-PRO has established a connection
with a currently secured target Master (requiring a username and password).
Default Settings The Default Settings button sets the video settings to their default values
(indicated in this table).
Undo Changes The Undo Changes button disregards any changes made on the page since
the last settings were saved.
Save Settings The Save Settings button saves any changes made to this page.
Sync on Green The Sync on Green button sets the source port to search for the signal on
Green signal.
Version Displays the firmware version currently used by the TPI-PRO.
Status Displays whether a video-sync signal is detected.
Firmware version
Output resolution
Incoming video signal