AMX TPI-PRO-2 - Manual (Page 69)

Firmware Pages and Descriptions
63 TPI-PRO Total Presentation Interface - Pro Edition
Password Setup Page
The Password Setup page (FIG. 47) centers around the properties used to assign passwords for the panel
pages.
The elements of the Password Setup page are described in the table below:
Calibration Page
This page (FIG. 48) allows you to calibrate the input touch device (touch panel) using the pre-selected
touch driver.
FIG. 47 Password Setup page
Password Setup Page Elements
Back Saves the changes and returns you to the previously active touch panel page.
Connection Status icon This visual display of the connection status allows the user to have a current
update of the TPI-PRO’s connection status regardless of what page is currently
active.
• A Lock only appears on the icon if the TPI-PRO has established a connection
with a currently secured target Master (requiring a username and password).
In Panel Password Change Accesses the alphanumeric values associated to particular password sets.
• PASSWORD 1, 2, 3, 4, 5 (protected) buttons open a keyboard where you can
enter alphanumeric values associated to a selected password group.
• Clearing Password #5 removes the need to enter a password before
accessing the Protected Setup page.
FIG. 48 Calibration page (actually 3 separate screens)
The request to touch the crosshairs
is the first on-screen message
Calibration successful is the second
on-screen message that appears
On-screen crosshairs used for
calibration of the touch device
after the calibration process is
completed