Aiwa HT-DV90 - Manual (Page 19)

ENGLISH
19
En
TV screen:
REPEAT PLAYBACK (CDs)
Press SHIFT+REPEAT repeatedly on the remote
control during playback.
With each press, the Repeat playback mode changes:
ONE: Repeats the current track.
To repeat playback of selected track(s)
Program the track(s) with the programed playback function, and
then press SHIFT+REPEAT to repeat playback of the programed
tracks (see “PROGRAMED PLA YBACK”, below).
REPEAT ONE
REPEAT ALL
REPEAT OFF
PROGRAMED PLAYBACK
(CD ONLY)
You can program up to 32 selected tracks to be played back in
your desired order .
If the total playing time of the program exceeds 99 minutes and
59 seconds, the playing time is not displayed properly
.
Unit’ s display
1 Press SHIFT+PRGM on the remote control during
stop.
“PRGM” lights up on the unit’ s display .
2 Press 0-9 on the remote control to select the track.
Example:
To select track 12, press 1, 2.
To select track 20, press 2, 0.
3 Press ENTER.
The selected track is programed.
4 Repeat steps 2 and 3 to program other tracks.
5 Press c to start playback.
The programed tracks are played back in the order of entry .
To stop programed playback
Press s .
To return to normal playback mode
Press SHIFT+PRGM during stop. At this point, the program is
not cleared. Pressing SHIFT+PRGM again will be back to
programed playback mode.
PLA
YING DVDS AND AUDIO CDS
ALL: Repeats all tracks on the disc.
OFF: Cancels repeat mode. (Normal playback)