Sound adjustments, Adjusting speaker levels, Adjusting the bass/treble level – Aiwa HT-DV90 User Manual

Page 28: Muting sound, Adjustments

Advertising
background image

28

ENGLISH

Sound and timer adjustment are possible on this unit.

SOUND ADJUSTMENTS

ADJUSTING SPEAKER LEVELS

First, adjust the speaker levels with a test signal (page 26).

After

that, if needed, adjust the speaker levels by following way with
playing back a software.

Press SUBWOOFER(

+

,

-

), CENTER(

+

,

-

) or REAR

(

+

,

-

) on the remote control to adjust subwoofer,

center or surround speakers level.

NOTE

• When the volume level is set to 80, any one of speaker channel

level cannot be set to more than +1 dB.

ADJUSTING THE BASS/TREBLE LEVEL

1 Press BASS/TREBLE repeatedly to select “BAS”

or “TRE”.

2 Turn VOLUME (press VOLUME

+

or

-

on the

remote control) to adjust bass/treble level.

Adjustable range: –10 to +10 (dB)

NOTE

• BASS/TREBLE is only ef fective for front speakers and

headphone.

MUTING SOUND

Press MUTE on the remote control.

“MUTE” appears on the display

, and sound from the speakers or

the headphones is muted.

To cancel muting

Press MUTE again.

SOUND AND TIMER ADJUSTMENTS

ADJUSTMENTS

ADJUSTING THE ANTENNAS
FM antenna:

Extend fully and position for the best possible reception.
An outdoor antenna is recommended for better reception. See
“CONNECTING AN OUTDOOR ANTENNA”, page 8.

AM antenna:

Position and rotate the antenna to find the best reception.

Changing FM reception to monaural

Press SHIFT+MONO TU on the remote control. “MONO” appears
on the display .

Monaural reception will reduce noise if FM stereo reception
contains noise.
To return to stereo reception, repeat the above.

If reception contains noise interference

Move the unit away from other electrical appliances, especially
digital audio devices, or turn of

f the appliances that generate

noise signals.

Changing the AM tuning interval

The default tuning interval of the receiver is 10 kHz/step. When
using the receiver in a 9 kHz/step area, change the tuning interval.
Select AM band and hold down BAND on the main unit.
Repeat to return to 10 kHz/step.

NOTE

Changing the AM tuning interval will return the station presets to
the initial setting.

Advertising