Aiwa HT-DV90 - Manual (Page 9)

ENGLISH
9
En
REMOTE CONTROL
INSERTING BATTERIES
Open the battery cover on the rear and insert two R03 (size AAA)
batteries.
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters
(16 ft.). When this distance decreases, replace the batteries with
new ones.
NOTE
• If the remote control is not going to be used for an extended
period of time, remove the batteries to prevent possible
electrolyte leakage.
• The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor inside the display window is exposed to intense light,
such as direct sunlight
- Other remote controls are used nearby (those of a television,
etc.)
OPERATING OTHER EQUIPMENT
You can set the remote control to operate other equipment by
inputting the brand code.
Setting the brand code
1 Turn on the equipment to be set.
2 Hold down the corresponding source button (
VIDEO 1, VIDEO
2, TV, CABLE/SAT.) and press 0-9 to input the three-digit
brand code. (Brand code is shown at the end of the operating
instructions.)
3 Release the corresponding source button.
The setting is completed.
Operating other equipment
Press the corresponding source button. The remote control goes
to the corresponding source mode. 0-9, TV/VIDEO, TV CH N
M , TV VOL +- and POWER etc., are available.
Pressing POWER again within 3 seconds turns this unit of f even
when the remote control is the corresponding source mode.
When operating this unit
, press DVD/CD or TUNER/BAND.
NOTE
• This remote control may not correspond to all models of the
brand shown at the end of the operating instructions.
• When the batteries are removed from the remote control, all
settings stored in memory may be lost.
• Some buttons on the remote control may not work exactly .
PARTS AND CONTROLS
MAIN UNIT
1 POWER 6 STANDBY/ON
Turns the unit on and of f (standby).
2 z OPEN/CLOSE
Opens and closes the disc tray .
3 PHONES jack
Plug in here an optional headphones set with a stereo mini
plug (ø 3.5mm,
5 / 32 in.). Speaker output is canceled.
4 SURROUND
Selects a listening mode.
BASS/TREBLE
Adjusts the bass/treble level.
SLEEP
Enters sleep-timer setting mode.
BAND
Selects the radio band.
5 FUNCTION
Selects DVD/CD, FM (AM), VIDEO 1 (ANALOG), VIDEO 1
(DIGITAL), VIDEO 2 (ANALOG) or VIDEO 2 (DIGIT AL)
function.
6 c PRESET
Disc: starts playback.
Radio: switches between tuning mode and preset mode.
s CLEAR
Disc: stops playback.
Radio: clears a station preset.
a SET
Disc: pauses playback.
Radio: stores the received station to preset.
fr TUNING - , gt TUNING +
Disc: skips to a previous or a succeeding chapter/track when
pressed, searches a chapter/track in fast forward or fast
reverse playback when held down.
Radio:manually tunes down or up within the band (tuning
mode). Selects the preset channel (preset mode).
PREP
ARA
TIONS